Category Archives: Featured Posts

Treatise on Razors by Benjamin Kingsbury 11th Ed.

ASR’s Comprehensive Guide to Buying a New Straight Razor

Buying a straight razor is difficult. Unlike purchasing a modern cartridge razor, there are options within options. This article will focus on new straight razors only. New razors made by the likes of: Dovo, Hart Steel, Thiers Issard, Revisor, Boker, Henckels, and Wacker. If you don’t see Fromm or Double Arrow on the list, it’s for a reason.

This article is broken into two parts. The first part is for the man who has never owned a straight razor before. The second half of the article is a guide for buying a razor (either for yourself or someone else) for the man who is a veteran at straight razor shaving.

Anatomy of a Straight Razor

For you veterans, you already know all these terms. For beginner’s, these are the terms of the trade. I will be using them to reference the various parts and features of various straight razors. Please reference these photos for straight razor terms.

Straight Razor Parts | Straight Razor Points | Straight Razor Grinds


Buy Shave Ready

When looking to purchase your first straight razor, there is one thing that is universally needed: a shave ready razor. Anything less than a shave ready razor will mean your first experience with a straight razor will be either sub-par or end in disaster. A razor needs to be not only sharp enough to cut beard hair, but it also needs to be sharp enough and smooth enough to cut cleanly without pulling. Think of your disposable razor if you want an example of a razor sharp enough to shave, but causes a lot of irritation through pulling.

Only Buy Razors Advertised as Shave Ready

With teh re-emergence of the straight razor as an artisan method of shaving, many vendors offer shave ready straight razors. Beware razors not offered as shave ready because they only come with a factory edge. While some manufacturers put a decent enough edge on their razors, it isn’t nearly the same level of sharpness as from a qualified honemeister.

Razor Width/Size

Razor width is the only real decision you have to make. The razor’s width will affect how easy it is to handle, the heft of the blade, and will narrow your options. As a beginner, you should buy no larger than 6/8″. 5/8″ is the most commonly recommended width, although 4/8″ has its advantages (but since no one makes any its not really in the running).

ASR recommends a 5/8″ razor for your first straight.

The reason we recommend a 5/8″ razor over a 6/8″ and absolutely recommend against anything larger, is because of ease of control. A smaller blade is vastly more maneuverable than a larger blade. While a larger blade allows you to see the angle of the razor a little easier, that isn’t a huge concern. Control over the razor is your first and only concern when starting out. Using a straight razor is a learned skill, you can’t pick one up and expect to master it in the first shave. The smaller the blade, the lighter it is and the easier it is to move around your face. In addition, it won’t get as stuck on your nose.


If your purchasing a new razor, you are limited in your choice as to who will make your razor. The major makers are Dovo and Thiers Issard followed by Boker, Revisor, Wacker, and Hart. Giesen & Forsoff and Gold Dollar also make razors but don’t have a huge presence in the market.

Yet another option is the custom or semi custom market. Beginners are well advised to stay away from these razors because you should know exactly what you want before plopping down the premium for a unique creation.

The Point

First, you need to have a basic idea of what you are looking for. Let’s talk about the tip/point first. As a beginner it is highly recommended to stay away from square or spike tips because of the pointy edge. Many a new user and veteran has inadvertently gouged themselves with the spiked point. Every other point has a rounded edge at the tip making it much harder to stab yourself with. That said, you can always ask your razor sharpener to mellow the spike by honing the spike off.

When purchasing your first razor, the reality of the situation is that your choice is going to be limited by budget and aesthetic concerns.

As for which point is best for a beginner, it comes down to aesthetic preference. None of the designs offers any functionality over any others with the exception of the spike point, whose sharp point is great for detail work. Just purchase the razor whose point looks the best to you. Between Dovo, Thiers Issard, Boker, and Wacker you should be able to find the point you want.

The Grind

Nearly all new straight razors are hollow ground. None are wedge ground anymore (and for good reason). To get a wedge or 1/4 hollow, you will have to go the custom route. Some razors are ground 1/2 or 3/4 hollow, such as the Thiers Issard Le Grelot or the Hart razor. Aesthetically, there is very little difference between hollow and half hollow. Quarter hollow will look a little more wedge-like, but those aren’t mass produced anymore.

The grind is the last thing you should worry about when purchasing your first razor. Nearly all new razors are hollow, so there is no real choice in the matter unless you go custom.

New users should stick with a hollow grind. They are easier to manuever around your face and a lot easier to hone. The only advantage thicker grinds offer is more mass behind the razor. Men with thicker beards report that the extra mass makes it easier to get through their tough beards. Of course, you can replicate the ease of cutting by applying more force while shaving.

Jimps/Thumb Notches

Jimps are little indentations cut into the tang of the razor for better grip. If you can afford a razor with jimps, you should buy one with jimps. They offer a better grip on the razor for easier control. Most razors with jimps come with bottom jimps. Some come with top jimps. Having both means a better grip on the razor.

Jimps are highly recommended. A thumb notch is like a warm cradle for your thumb. Having both is true shaving luxury.

A thumb notch is just that. A concave notch cut into the tang for your thumb. Can be combined with jimps. A great example of both is the Thiers Issard Oak Wing. Thumb notches don’t allow for greater control, but do make a great resting place for your thumb. Plus its comfortable.

The Steel

Dovo and Thiers Issard have come out with models advertising Silver Steel or some other exotic sounding name. The truth is that with modern steel, it doesn’t matter. Modern steel is so uniform and well made that the the true difference is going to come down to the heat treatment. See our related article on what makes a razor sharp.

In terms of whether you should buy these supposedly better steels, the answer is yes. If the razor otherwise appeals to you, you should buy it. Another consideration is that these razors generally have a better level of fit and finish and thus perform slightly better according to some accounts. In the end, it’s just marketing, but usually denotes a higher end model.

Scales, Etching, etc.

There is a huge variety of scale materials to choose from. From wood to bone to plastic, they all do the same job of protecting the edge while the razor is not in use. Plastic comes in many designs, from the very plain white or black, to the iconic Dovo faux Tortoiseshell. Wood provides that unique and natural look to the straight razor, while man made materials such as Micarta offer a modern, yet refined look. Horn and bone are the most traditional choices. There are many more scale materials than I can write about in this section. The only consideration you have to make is whether you like the look of the scales on the razor.

Most modern razors come with balanced scales, but some scales are extremely heavy relative to the blade. Specifically the Dovo Mammoth Ivory and the Dovo Micarta scales. These scales are much heavier than their respective blades and throw off the balance. But they sure do look great.

Scales, spine work, and blade etching are purely aesthetic considerations. Purchase the razor you like the look of.

The same considerations go into the gold wash or etching on the blade. From the extremely simple Dovo Best to the intricate and beautiful Bergischer Lowe, there is a wide range of options. Again, for spine work. A worked spine such as that found on the Bergischer Lowe simply add to the complexity and beauty of the straight razor. Such added details also add to the cost.

How Much to Spend

The last major factor this article will touch upon is the cost. The amount of money you spend on a straight razor should fit your budget. That said, a straight razor is an investment which will pay off in the long run with incredible savings over time. However, if your only looking to try straight razor shaving, you should only buy a basic razor.

If you are sure your going to stick with straight razor shaving no matter what, buy the razor that you really want. Don’t go into debt to buy it though, they don’t cost that much.

If you aren’t sure about straight razor shaving, buy the razor that fits your budget and that you wouldn’t mind keeping for a long time. The great thing about straight razors is that they hold their value extremely well. They’re not art, but you can expect to be able to recoup ~75% of the lowest retail price.

If you just want to try straight razor shaving, your better off finding a friend to borrow one from. Otherwise, a Dovo “Best Quality” is the cheapest new straight razor you can easily find shave ready. Another option is to check out the offerings at Razor Emporium to see if there are any restored vintage razors within your price range.

Razors to Avoid

With so many sellers trying to get your money for nothing, you have to watch out for yourself and take precautions. As said earlier, only buy a shave ready razor. If the razor is not sold as shave ready, unless you want it solely for your mantlepiece, look for another vendor or count on spending an additional $20 for honing.

Avoid anything made in Pakistan. Period. This cannot be stressed enough. No matter how pretty it looks, don’t buy it.

Avoid the following razors: Timor, Fromm, & Venus. In fact, avoid any razors that claim to be made in Germany and costs less than a Dovo Best. We’re not entirely sure where these razors are made, but other countries’ made in standards are less stringent than the US’s. All you need to know about these razors is that they’re mediocre at best, don’t come shave ready, and are so close in price to a Dovo Best, your better off buying one of those.

The Ultimate Straight Razor Shaving Gift Guide

Since it is the holidays, we’re rolling out a gift giving guide. This guide is still good for the rest of the year as straight razors don’t change. This guide is written for the person who knows nothing about straight razors or straight razor shaving. Don’t worry, we did all the hard work; all you have to do is make sure the recipient doesn’t already have the item you’ve chosen to gift. So, without further introduction, let’s take a look at what to buy these people!

This article is broken up into two parts. The first part is a gift guide for the straight razor beginner. It includes ASR’s advice on exactly which straight razor to buy along with the necessary accessories that should be given along with the straight razor.

The second part of the article is all about the veteran straight razor user. This hard to buy for person already has a strop, brush, soap, and a razor. What to buy this person? Well, this is what we would want for Christmas or our birthday!

Buying a Straight Razor for the New User

While I am still working on the Comprehensive Straight Razor Buying Guide, I’ll have to make this part short. For the absolute beginner with no straight razor experience, the standard advice is to purchase a 5/8″, round point, inexpensive, new or restored straight razor. Jimps are preferable. What!? You say. Don’t worry, here are some suggestions.

Dovo Faux Tortoise Shell Straight Razor Dovo Basic Straight Razor

Dovo makes some of the nicest looking straight razors today. The Dovo Faux Tortoise Shell is a classic. The design is simply beautiful. The blade even features gold etching on the face. For the more economical purchase, the Dovo Best Quality straight razor makes a great starter razor. All function, no frills. This razor will do the same job as it’s fancier brother without the frills and pomp.

Of course, the new straight razor user needs a little bit more equipment than a straight razor. He/She also needs a strop. It is highly recommended to convert fully to wet-shaving to achieve the best shaves possible so a brush and soap should also be on the list if they don’t already own said items. The silvertip badger brush is the ultimate expression of luxury. The humble boar brush on the other hand is a fully functional basic alternative.

The new straight razor user should own a strop. The Dovo strop is as good as it gets. However, for their first strop, it is recommended to go with a less expensive, but functional strop. The Fromm basic strop fits the bill perfectly. Another good option is a loom strop. Priced in between the Dovo & Fromm hanging strops, the loom strop has the added benefit of not having to learn how to tension the strop. A really good choice for the beginning straight razor user.

Soaps, Brushes, & Strops

Geo F. Trumper Almond Shaving Soap in Wooden Bowl

Geo f. Trumper Rose Shaving Soap in Wooden Bowl

D.R. Harris Marlborough Shaving Soap in Bowl

Omega Boar Shaving Brush

Semogue Pure Badger Shaving Brush

Semogue Silvertip Badger Shaving Brush

Dovo Premium Leather Strop

Fromm Basic Razor Strop

Dovo Loom Strop

Buying a Razor for the Veteran Straight Razor User

This person already owns a straight razor and probably knows what he/she wants. This person either already owns a basic straight razor or has a fancier one like the Dovo Faux Tortoise. Buying a straight razor for this person is tricky. Thankfully, if they don’t already own a Dovo faux tortoiseshell razor, then that makes the perfect gift. Unfortunately, it’s a pretty popular razor and the recipient may already own one.

The good news is that we have just the cure. Our #1 pick if he/she doesn’t already own one is the Dovo Bergischer Lowe in Buffalo Horn Scales. Or, if your looking for something truly exotic, think about the Dovo Razor in Siberian Mammoth Ivory. Below are pictures along with a few more ideas.

Dovo Bergischer Lowe in Buffalo Horn Scales

Dovo Razor in Siberian Mammoth Ivory

Dovo Ivory Micarta Straight Razor

Dovo Ebony With Silver Engraving Plate

Dovo 5/8″ Stainless Steel Snakewood (“Schlangenholz”) Razor

Dovo Razor in Genuine Bone Scales

As you can see, each of these masterful creations are as beautiful as they are functional. Any of these razors will make a welcome addition to any straight razor enthusiast’s collection.
But wait! After buying all those razors, he needs somewhere to put them. Look no further than:

Straight Razor Display Case


It might not be marketed as such, but pen display cases are perfect for displaying a straight razor collection. This one is well made and holds seven razors, one razor for each day of the week!

Stocking Stuffers | Small Gifts

Of course, buying someone a straight razor is a rather large expenditure. If instead you are looking for something a little less expensive, then below are some small gift ideas. They include our favorite soaps and brush stands. Each of these soaps comes with a beautiful wooden bowl. They make a great gift.

Brush Stand

Geo F. Trumper Almond Shaving Soap with Wood Bowl

Geo F. Trumper Rose Shaving Soap

D.R. Harris Arlington Hard Shaving Soap

D. R. Harris Almond Shaving Soap

D.R. Harris Lavender Shaving Soap

Vulfix Travel Brush

Edwin Jagger Travel Brush

Kent Travel Size Brush

Sorry we couldn’t think of any other stocking stuffer ideas. Any other stragiht razor shaving items small enough to fit in a stocking are rather mundane daily skin care products such as moisturizers, aftershaves and other items.

Razor Restoration – Going from Rusting to Amazing

The following is an illustrated tour of how we restore a straight razor to near mirror finish. We start by sanding away any rust and oxidation that is on the blade, bringing out the clean steel underneath. We then polish the razor on an industrial buffing machine using buffing wheels & compounds to bring out the shine and luster trapped underneath all the grime. Finally, we polish the razor by hand to clean away any debris and remove any swirls left over by the buffing process.

Our buffing process does not completely remove pitting. In order to completely remove pitting, extreme sanding is necessary to grind away the metal beyond the pits. This process adds considerable time to the restoration process. In addition, unless an even inordinately larger amount of time is spent removing every single scratch mark, the razor will be left with grind marks. We do not currently offer this service because it is so time intensive that the cost would be prohibitive. We will review this decision if we receive enough requests for such work.

WARNING! A buffing machine is the most dangerous machine in the shop. If you use one always wear eye protection and a breath mask. Only work in highly ventilated areas.

Razor in Original Rusted Condition

Here is the razor in its pre-restoration condition. We wiped it down a little to get all the surface dust off. As you can see, the rust and oxidation was pretty extensive. The rust was allowed to build up quite extensively in some areas. You can see that pits had already started to form throughout most of the face of the blade. All in all, this razor was not in bad condition. The razor will turn out nice and shiny, albeit with shiny pitting.

Razor After Sanding

We use 600 grit sandpaper to scour away the rust and tarnish. You can see the steel beginning to come out. Its even starting to shine a little. While you can’t see a reflection in the steel at this stage, you can start to see what the final product is going to look like. As you can see the scratch marks are in a vertical pattern. This is to ensure that if any scratch marks are left over after the final polishing stage, that they match the factory grind marks already on the razor. We clean the tang, including the jimps, and the blade during this process. You can really see the pitting in these shots. The black grime in the pits and crevices is actually steel and abrasive that was ground off the surface of the razor. They will disappear after the final polishing stages.

Razor Midway through the Buffing Process

The next step is to buff the razor using an industrial strength buffing machine. The first part of buffing is to remove the sandpaper scratches. A cutting compound is used to remove previous scratches from the steel. This process takes half an hour or more to get a good finish and remove all the sandpaper scratches. The sun was setting when the pictures were taken, but you can see the shine starting to come through. The finish is a duller, matte finish, but the razor is a lot shinier than when it started. You can even see yourself if you shifted the razor in the right direction. It was blurry, but it was reflecting. You can also see fingerprints all over the blade from handling it for the photos. There was still compound left on the blade.

Razor After Final Polishing

This is the final finish. You can see the camera being reflected quite clearly even though it is far away. We could have done the reflecting text thing, but we chose not to. In these pictures you can see the true extent of what we can accomplish. All the pits are clearly present. As said above, we don’t remove serious pits. You can even see some marks from sanding or a tool mark from a prior owner. Because the razor is so polished, every single imperfection is magnified for you to see. You can also see yourself in the razor. The finish is a near mirror finish on the steel. However, the severe pitting throughout the surface of the razor ruins the mirror effect by distorting the image. The mirror effect is much better in the tang where the razor suffered less damage. You can see a better example of our polishing on this razor which started with much less pitting and corrosion.

This razor isn’t quite done. It still needs to be re-shod in new scales. We’ll take more pictures then and post them in this article. But that’s it.

Update: The razor is finished and the pictures have been taken. The final steps were to mount the razor in its new scales and do the final polishing by hand. As you can see, the results were fantastic!

We’re Giving Away a Razor for Your Thoughts

FREE Razor Giveaway for Our Customers!

***Limited to the first 50 entrants*** 1 in 25 chance of winning!!!

Razor Details

The razor is from mid 20th century Germany. Made in Solingen by Max Dorner. Their logo is an almost exact copy of Mercedez Benz.

The blade features a square point and measures 5/8″. Perfect for novices and veterans alike.

The tang features bottom jimps for a better grip.

The scales are made from black horn and have survived beautifully. They have been polished back to their original luster.

But wait, there’s more! You can also win your choice of the following!

D.R. Harris Lavender Hard Shaving Soap Refill

1 reviews
D.R. Harris Almond Shaving Soap Refill

1 reviews
D.R. Harris Arlington Hard Shaving Soap Refill

1 reviews
Tabac Tabac Shaving Soap Bowl REFILL 125g (m)

58 reviews

Enter the contest by doing the following:

1) Tell us how much you like our sharpening in the comment section here. OR write a review on SRP or B&B (let us know you’ve done so to ensure you get credit).

2) Subscribe to our email list by clicking here.

3) That’s it! Once we receive 50 entries, the winners will be announced. The winners will be randomly determined. You cannot win both.